1. Introduction
1) Definition of preservation and food-spoilage micro-organisms
Food preservation is the process of treating and handling food to stop or greatly slow down spoilage (loss of quality, edibility or nutritive value) caused or accelerated by micro-organisms. Some methods, however, use benign bacteria, yeasts or fungi to add specific qualities and to preserve food (e.g., cheese, wine
heat transfer coefficient값의 문제점.
Convection heat transfer coefficient가 일정하다고 생각했으나 실제실험에서는 조원들의 움직임이나 실험실 문의 여닫음에 의해서 Forced convection이 일어났을 가능성이 있다. Forced convection이 일어나지 않았다고 생각하더라도 Free convection시에 온도구배에 의해서 실제로 Convection he
2) 대류 열전달계수(coefficient of convection heat transfer)
매뉴얼에 주어진 h값의 표를 보간하여 이번 실험에서 사용할 대류 열전달계수(coefficient of convection heat transfer) h를 구하도록 하겠다. steady state에서의 온도는 다음과 같이 주어진다.
22.63°
41.3°
26.9°
위의 값들을 이용하여 매뉴얼에 주어진 표
heat-transfer coefficient)
직렬 고체층을 통과하는 열속 (heat flux)은 구동력, 즉 총괄 온도차 ΔT에 비례한다.
열 교환기에서 구동력은 Th-Tc로 택할 수 있다. 여기서 Th는 뜨거운 유체의 온도이고, Tc는 찬 유체의 온도이다.
Th-Tc항을 총괄 국부 온도차 (overall local temperature difference)ΔT이다.
그림 1에서와 같이
heat sinks for the LCD TV by adequate natural convection flows, some numerical investigations have been performed. Heat generation rate of the LED panel, temperature distributions of heat sinks and of the surrounding air were properly assumed for the numerical heat transfer analysis.
As the results, surface area, the heat transfer coefficient, the heat performance, and optimum fin spacing of th
Ⅳ. 전력공학의 공식
1. 물의 위치수두
1) 정의
수두를 헤드라고도 한다. 단위는 길이의 차원이나 위치 에너지를 구하는 기본이 되는 값이며, h는 수면의 높이이다. 즉, 단위 무게 [kg]당의 물이 갖는 에너지를 말한다.
2) 공식
위치 수두 = H [m]
2. 물의 압력수두
1) 정의
수관 속의 유수의 압력은 유
SEM?
Scanning electron microscope
To analysis surface of specimen
Qualitative analysis at certain point
Operation principal of SEM
Emission electron from filament
Accelerate electron by electric field
Focusing electron by lens → mono-chromatic electron beam
Generate secondary electron and etc.
Detection of electron
1. 실험 목적
이번 실험의 목적은 크게 세가지로 나누어 볼 수 있다.
①소음을 측정하는 기기들의 사용방법을 익히고 친숙하게 한다. 책에서 이론상으로 배워왔던 내용들을 Sound Level Meter 라는 소음측정기기로 주변에서 흔히 찾아볼 수 있는 소음원들의 소음도를 측정함으로써 이론을 더욱 확실히
1. 기존 PLANT 내의 제어실에 새로운 CONTROL SYSTEM 을 설치하고 기존 CONTROL SYSTEM 과의 DATA COMMUNICATION을 하려고 한다. 이때 고려해야할 사항을 설명하시오. 또한, OSI (Open System Interconnection) 7 Layer 에 대해 설명하고 TCP/IP 4계층과 비교 및 적용되는 Protocol의 예를 드시오.
① 이기종간의 제어시스템간의 데이타